These are launch files created to boot into the Wood R4 firmware while using from another firmware such as YSMenu.
Please make sure you pick the correct .nds launcher that matches the firmware you have downloaded!

---

1. Download and install the appropiate wood firmware you wish to use.
2. Copy the matching Wood R4 .nds boot file onto the sd card (the location does not matter)
3. When in any firmware, boot the .nds file and it'll start the Wood firmware.
4. Thats it!


If you wish to run another firmware first when botting your ds, don't include _DS_MENU.DAT when installing a Wood firmware.
The .nds file will act as your boot file instead.

---

Please make sure you've obtained these files from one of the following links:
- http://gbatemp.net/index.php?showtopic=269241
- https://www.gamebrew.org/wiki/Wood_Firmwares


Thank you for downloading, please enjoy!
CoolKill3r